Featuring projectors for that squiffy end vehicle look
SAE/DOT in compliance
International testing to ensure the best quality, safety and durability
Headlight readily obtainable in chrome and black finishes
Scrupulously engineered and vehicle test fitted
Description
It is SAE/DOT meeting the requirements. It is precisely engineered and vehicle test fitted. Extensive testing is done to protect the best quality, safety and durability. Headlights are available in chrome and jet-black finishes.
Customer Reviews
Honda crv conclusion lights
Simply put in my new Depot headlight projector assemblies for my 2003 CRV. Love them. They are a perpect fit and unhurried to install. OMG they are bright. My old stock lights I could only see half way down the street now all the way. They also add a meticulous touch to the car as they differ in bulb layout from the stock set. they just look famous on the car. The only thing I found was the location for the stock blinker holder is a very tight fit. Had to use pliers to irregularity into place. Give them a 4.5 out of 5. Thanks
List Price: $232.62
Price: $154.19 You Save:$78.43 (34%)
Details
Wheel various functions
Engineered to costly standards
ACDelco is an Starting Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest distinction standards required by vehicle manufacturers
Tested under Draconian conditions
Stores diagnostic nuisance codes
Description
OE Serve Control Modules
When you are looking for a match to original equipment specifications in a replacement part for your GM agency, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Master Modules, Mass Air Flow Sensors, Oxygen Sensors, Discharge Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Stance Sensors, Idle Air Control Valves and Secondary Air Injection Repulsion Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the words. Trust ACDelco to help your vehicle run clean and green.
Current cars, trucks and SUVs are the wonder of electronics and in that mix, there is nothing more critical to conduct than the control modules that dictate the operation of the vehicle's vital systems. When it comes to be in control of modules, there is no better name than ACDelco. Our Original Equipment Service Appliance Control Modules, Transmission Control Modules, Powertrain Oversight Modules, Body Control Modules and Vehicle Control Modules are nicety remanufactured and rigorously tested to meet the OEM standards for your GM vehicle.Sureness ACDelco for Control Module for your GM vehicle.
Customer Reviews
Body Module - 2002 Aztek
This was a reckoning! I saved over $100 from what the dealer wanted for the part. I still had the dealer install it in my Aztek, which went satisfactory. All my false codes/messages went away. I was getting Employment vehicle soon, which had codes for wheel speed mismatch, like for triggering anti-pursue brakes when I didn't need it, also for incorrect high beam voltage, and possibly something else.Fast shipping too. I did the cheapest way and it came in 3 days. :-)Thanks.Bob
Discard- Used Parts
I ordered this artefact from Amazon to replace the faulty BCM in my Aztek. I was under the impression that when it said "NEW", it was a new part. I had a mechanic pen-pal install it, since it was not an easy job. It took about 3 1/2 hours to pull but for the console and put the new BCM in. I then drove the car to the dealer to have the new BCM programmed, which can only be programmed one time! The tradesman told me that the BCM already had been programmed with another cars information, and the only thing they could do is unlock the air. The airbags do not work now, since apparently what was wrong with this part when it was taken out of another Aztek. Deficient rare story, I paid $180 for a used part and another $150 at the dealer for them to essay to program it, plus the $200 to my mechanic friend to replace it, and my car still is not attached!!
December 2, 2010
| Helpful Votes: 1 | Rating: 1
Aztec BCM
Worked huge don't waste time trying a used one I tried three of them before I gave up they cannot be reprogrammed this worked critical at half the cost of GM Dealership. Thanks Amazon
Broad testing to ensure the best quality, safety and durability
Headlight at one's disposal in chrome and black finishes
Description
It is SAE/DOT meeting the requirements. It is precisely engineered and vehicle test fitted. Extensive testing is done to insure the best quality, safety and durability. Headlights are available in chrome and malignant finishes.
Bob Strandwold Racing Prepares for 2012
20.05.12
Two-space Spears Southwest Tour Series championship car owner Bob Strandwold is preparing to fight in the 10-race SRL schedule with four drivers, Michael Sandoval , Craig Raudman , Jared Vorse and Dave Byrd , in part-in unison a all the same and full-time roles. "I am very pleased to have the 2011 SPEARS SRL Southwest Expedition Series Rookie-of-the-Year, Michael Sandoval driving the #1 Sandoval and Sons Backhoe/Bavaro Farms Chevrolet" stated Bob Strandwold. BSR is purchasing a new chassis and expectation for delivery sometime in February so Craig can oversee the construction and completion of the new #2 car. “Michael and group chief Jeff Strandwold communicated very well together last year in route to their Rookie-of-the-Year right in there own (Sandoval’s) equipment.
The only two basic pieces on the car were the roof and the drivers side mirror. What he saw was the woman he had just paid for the car, hopping up and down, enthusiastically waving goodbye to his newfound windfall. "It was a 68 Camaro in body only it was minus the engine," Vaughn recalled of that day about 10 years ago. It looked like those cars you pay a dollar to hit with a sledge sledge hammer," chimed in his wife, Denise.
Feb 27, 2009 by april4 | Posted in Maintenance & Repairs
My son wrecked my car a few weeks ago and i only had disadvantage. The estimate to fix it is $4300. No way i can afford it! Does anyone know where i can find 2 used commuter doors for a 2002 Toyota Camry LE? I need both in silver. I living in East Tennessee
I support you to search for the car parts you need from http://www.automotive-online.com search box, you will get the directory of suppliers with complete contact details. You can even send free probe to any supplier directly from this website.
martin S | Mar 02, 2009
where can i find cheap muscle car body parts?
Aug 03, 2010 by | Posted in Maintenance & Repairs
I have a 1968 pontiac turbulence custom and it is almost impossible to find nicely priced body panels and/or fenders. Can anyone certain me a website or something along those lines where i can find the body parts? Thanks for your time
go to a city swap meet or a junkyard and if your lucky you will find them there the cheapest.
mister ss | Aug 03, 2010
How are steel car body parts made?
Oct 20, 2010 by Edward | Posted in Engineering
Like hoods, humanity panels, doors, etc.
Is molten steel poured into some kind of mushroom. Or his straight sheet-metal made first and then shaped? Some videos, pictures, or illustrations of this technique would be helpful too.
fitted sheet metal that's formed in a punch press or hydraulic press.
these are smaller versions.
http://www.youtube.com/supervise?v=ula3oNSON DI
http://www.youtube.com/watch?v=Z26pEs8bo cs&feature=related
If ?car = mycar, then the dispute body '(and (mycar car) (mycar ?part has-part) (?
part (a weight))) is constructed and posed, asking for the parts of mycar. ...
Creator: Tom Brownell | Antiques & Collectibles - 1999-12-24
When searching for NOS parts, a Hollanders enchiridion, described in the ... Again,
these can sometimes come for cars of different make and body sort than the ...
